Factory Cheap Price Deck Railing Aluminum Handrail Profiles For Pipe Line

Basic Information

Product Display

technical parameter
1. Design standards for guardrails for indoor and outdoor platforms, stairs and ramps
1.1 The height of the platform guardrail (the distance between the upper plane of the handrail and the ground): 900mm-1200mm;
1.2 The vertical spacing of the guardrail columns is less than or equal to 1200mm, and the vertical spacing of the glass guardrail columns is less than or equal to 1000mm;
1.3. The vertical spacing of guardrail poles is less than or equal to 110mm;
1.4 The balance distance between the handrail and the upper cross bar is less than or equal to 110mm, and the balance distance between the lower cross bar and the ground is less than or equal to 110mm;
1.5 Requirements for the pipe wall: handrails, uprights ≧1.4mm; crossbars ≧1.2mm; uprights ≧1.0mm;
1.6 Profile finish: The coloring production process of Aksu outdoor powder high temperature electrostatic powder spraying or oxidation electrophoresis is adopted, and the color is according to the engineering design;
1.7 Production process: The production process of fast combination of classical buckles is adopted, and no welding, wire connection and corner code connection are required;
1.8 Technical requirements for glass guardrail: use toughened laminated safety glass, thickness 12mm, embedded depth 12mm, and the four sides of the glass are inlaid with EPDM strips;
1.9 Technical requirements for construction and installation: The handrail and the wall facade are fixed by aluminum die-casting internal expansion bolts, and the column and the ground are fixed by aluminum connecting parts internal expansion bolts.
1.10 The overall uniform load of the guardrail is ≧1000N/m;
1.11 Common specifications of pipes
Armrest: 100mm×50mm×1.2mm, 95mm×45mm×1.4 mm, 80mm×50mm×1.2mm, 80mm×40.5mm×2.0 mm, 70mm×46.9mm×1.2mm, 70mm×46.9mm×1.4 mm, 80mm×46.9 mm×1.4 mm, 69mm×46.9mm×1.2mm, 70mm×40mm×1.2 mm;
Column: 56.5mm×56.5mm×1.2 mm, 60mm×56.5mm×1.2 mm, 56.5mm×45mm×1.2mm, 49.5mm×49.5mm×1.5 mm, 44mm×37.5mm×1.5 mm;
Crossbar: 44mm×37.5mm×1.5mm, 30mm×26.9mm×1.2mm;
Pole: 25mm×24mm×1.0mm, 24mm×20mm×1.0mm.
Scope of application: suitable for indoor and outdoor staircases, balconies, floor-to-ceiling windows, automatic elevator openings, glass curtain wall guardrails and platforms, corridors, atrium racecourses, bridges, traffic road isolation, lakeside, riverside, and roofs for civil and industrial buildings guardrail etc.
2. Indoor bay window guardrail design standard
2.1 The height of the bay window guardrail (the upper plane of the handrail is from the ground): 800mm-900mm;
2.2 The vertical spacing of guardrail columns is less than or equal to 2000mm;
2.3 The vertical spacing of guardrail poles is less than or equal to 110mm;
2.4 The balance distance between the handrail and the upper cross bar is less than or equal to 110mm, and the balance distance between the lower cross bar and the ground is less than or equal to 110mm;
2.5 Requirements for the pipe wall: handrails, uprights ≧1.4mm; crossbars ≧1.2mm; uprights ≧1.0mm;
2.6 Profile finish: The coloring production process of Aksu outdoor powder high temperature electrostatic powder spraying or oxidation electrophoresis is adopted, and the color is according to the engineering design;
2.7 Production process: The production process of fast combination of classical buckles is adopted, and no welding, wire connection and corner code connection are required;
2.8 Technical requirements for construction and installation: The handrail and the wall facade are fixed by aluminum die-casting internal expansion bolts, and the column and the ground are fixed by aluminum connecting parts internal expansion bolts.
2.9 The overall uniform load of the guardrail is ≧500N/m;
2.10 Common specifications of pipes:
Armrest: 69mm×46.9mm×1.2mm, 70mm×46.9mm×1.2mm, 51mm×38mm×1.4mm, 36mm×33mm×1.2mm;
Column: 56mm×56mm×2.0 mm; 44mm×37.5mm×1.5 mm; 44mm×32mm×1.4 mm;
Crossbar: 30mm×26.9mm×1.2mm;
Pole: 24mm×20mm×1.0 mm.
Scope of application: suitable for indoor bay windows in civil buildings and kindergarten activity places.
3. Air conditioning guardrail design standards
3.1 The height of the air-conditioning guardrail (the upper plane of the handrail is away from the ground): 600mm—900mm;
3.2 The vertical spacing of guardrail columns is divided according to the engineering design length;
3.3 The balance distance between the cross bars is ≦20mm—500mm;
3.4 The requirements of the pipe wall: the column≧1.5mm; the crossbar≧1.0mm;
3.5 Profile finish: The coloring production process of Aksu outdoor powder high temperature electrostatic powder spraying or oxidation electrophoresis is adopted, and the color is according to the engineering design;
3.6 Production process: The production process of the classical buckle is used for quick combination without welding, wire connection and corner code connection;
3.7 Technical requirements for construction and installation: The horizontal bar and the wall façade are fixed by aluminum die-casting internal expansion bolts, and the column and the ground are fixed by aluminum connecting parts internal expansion bolts.
3.8 The overall uniform load of the guardrail is ≧500N/m;
3.9 Common specifications of pipes:
Column: 49.5mm×49.5mm×1.5mm, 44mm×37.5mm×1.5mm;
Crossbar: 60mm×45mm×1.5 mm, 50mm×25mm×1.0 mm, 24mm×20mm×1.0 mm.
Scope of application: suitable for outdoor air conditioners and building exterior wall decoration in civil buildings.
4. Design standards for fences and guardrails
4.1 Height of fence guardrail (upper end of column from the ground): 1200mm, 1500mm, 1800mm, 2000mm;
4.2 The vertical clear spacing of the column is 2000mm, 2500mm and 3000mm;
4.3 The vertical spacing of the poles is 110mm—120mm;
4.4 The distance between the upper end of the pole and the upper end of the column is 50mm, and the distance between the lower end of the pole and the ground is 50mm;
4.5 The layout of the second cross bar: the upper cross bar is 200mm from the upper end of the vertical bar; the lower horizontal bar is 150 mm from the lower end of the vertical bar;
4.6 The layout of three cross bars: the upper cross bar is 200mm from the upper end of the vertical bar, the lower cross bar is 150 mm from the lower end of the vertical bar, and the distance between the middle cross bar and the upper cross bar is 120mm-150mm;
4.7 Common specifications of pipes:
Column: 100mm×100mm×2.0mm, 80mm×80mm×2.0mm, 56mm×56mm×2.0 mm; U-shaped crossbar: 60mm×45mm×1.5 mm; 50mm×34mm×1.5mm;
Pole: 70mm×25mm×1.0 mm, 46mm×20mm×1.0 mm, 35mm×35mm×1.0 mm, 25mm×24 mm×1.0 mm, 24mm×20 mm×1.0 mm, 19mm×19mm×1.0 mm, 16mm×16mm ×1.0 mm, D22 ×1.0 mm.
4.8 Profile finish: The coloring production process of Aksu outdoor powder high temperature electrostatic powder spraying or oxidation electrophoresis is adopted, and the color is according to the engineering design;
4.9 Production process: The cross bar and the vertical bar are fixed by interspersed riveting, avoiding welding, wire connection and corner code connection; the vertical column and the horizontal bar are fixed by aluminum die-casting connectors;
4.10 Technical requirements for construction and installation: The horizontal bar and the wall elevation or column are fixed with aluminum die-casting internal expansion bolts, and the column and the ground are fixed with internal expansion bolts of galvanized steel connectors, or pre-embedded.
4.11 The overall uniform load of the guardrail is ≧500-1000N/m;
Scope of application: suitable for parks, communities, villas, factories, schools, industrial parks, substations and other places that need greening, decoration and enclosure.
5. Design standards for flowerbed lawn guardrails
5.1 Height of guardrail (upper end of column from the ground): 500mm, 600mm, 700mm, 800mm;
5.2 The vertical net spacing of the column is 2000mm, 2500mm and 3000mm;
5.3 The vertical spacing of the poles is 110mm—150mm;
5.4 The distance between the upper end of the pole and the upper end of the column is 50mm, and the distance between the lower end of the pole and the ground is 50mm;
5.5 Horizontal load of guardrail ≧500N/m;
5.6 Common specifications of pipes:
Column: 100mm×100mm×2.0mm, 80mm×80mm×2.0mm, 56mm×56mm×2.0mm;
U-shaped crossbar: 60mm×45mm×1.5mm; 50mm×34mm×1.5mm;
Pole: 70mm×25mm×1.0 mm, 46mm×20mm×1.0 mm, 35mm×35mm×1.0 mm, 25mm×24mm×1.0mm, 24mm×20mm×1.0 mm, 19mm×19mm×1.0 mm, 17mm×17mm×1.0 mm, D22 mm×1.0 mm;
5.7 Profile finish: The coloring production process of Aksu outdoor powder high temperature electrostatic powder spraying or oxidation electrophoresis is adopted, and the color is according to the engineering design;
5.8 Production process: use the fixed connection method of milling hole pull riveting to avoid welding, wire connection and corner code connection;
5.9 Technical requirements for construction and installation: The horizontal bar and the column are fixed by aluminum die-casting internal expansion bolts, and the column and the ground are fixed by the internal expansion bolts of galvanized steel connectors, or pre-embedded.
5.10 The overall uniform load of the guardrail is ≧500N/m;
Scope of adaptation: It is suitable for different places that need greening and protection, such as parks, communities, villas, factories, schools, roadsides, etc.
6. Design standards for guardrail gates
6.1 Height of guardrail gate (the highest point of the gate is away from the ground): 1200mm, 1500mm, 1800mm, 2000mm, 2500mm, 2700mm, 2900mm;.
6.2 The width of the gate (the vertical net spacing of the gate posts) is 1200mm-4500mm (according to the engineering design);
6.3 The vertical spacing between the poles is 110mm—120mm;
6.4 The distance between the upper end of the pole and the upper end of the column is 50mm, and the distance between the lower end of the pole and the ground is 50mm;
6.5 The layout of the second cross bar: the upper cross bar is 200mm from the upper end of the vertical bar; the lower horizontal bar is 150 mm from the lower end of the vertical bar;
6.6 The layout of three cross bars: the upper cross bar is 200mm from the upper end of the vertical bar, the lower cross bar is 150 mm from the lower end of the vertical bar, and the distance between the middle cross bar and the upper cross bar is 120mm-150mm;
6.7 The layout of four rails: the upper rail is 200-300mm away from the upper end of the vertical rod, the lower rail is 50mm away from the ground, the distance between the upper two rails is 120mm-150mm, and the distance between the upper two rails is 120mm-150mm;
6.8 Common specifications of pipes:
Column: 100mm×100mm×2.0mm, 80mm×80mm×2.5mm, 56mm×56mm×2.0 mm; U-shaped crossbar: 60mm×45mm×1.5 mm; 50mm×34mm×1.5mm;
Pole: 70mm×25mm×1.0 mm, 46mm×20mm×1.0 mm, 35mm×35mm×1.0 mm, 25mm×24 mm×1.0 mm, 24mm×20 mm×1.0 mm, 19mm×19mm×1.0 mm, 16mm×16mm ×1.0 mm, D22 ×1.0 mm.
6.9 Profile finish: The coloring production process of outdoor powder high temperature electrostatic powder spraying or oxidation electrophoresis is adopted, and the color is according to the engineering design;
6.10 Production process: The frame of the gate is fixed by riveting with special connectors, and the horizontal bar and the vertical bar are fixed by milling holes and riveting;
6.11 Technical requirements for construction and installation: the frame of the gate and the wall facade or the column are connected and fixed by stainless steel hinges, and the column and the ground are fixed by galvanized steel connecting pieces with internal expansion bolts, or embedded and fixed.
6.12 The overall uniform load of the guardrail is ≧1000N/m;

Certificates and Honors



Factory display





Company Profile

Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.


Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!

The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.

FAQ

Q: What colors can powder coatings be used for? The thickness of the powder coat?
A: We can do any color for powder coating as long as you can provide color samples. Our usual powder coating thickness is 60-80um.

Q: What color can the wood grain be?
A: Our most popular colors are Western Red Cedar, Australian Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other color, we can provide the color according to you.

Jiangyin Longkang Metal Products Co., Ltd. is the holding company of Wuxi High Mountain Hi-Tech Development Co., Ltd. It is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.

The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.

Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!